Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Closed Thread
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-01-1999, 09:32 PM
Michael's Avatar
Veteran
 
Join Date: Jul 1999
Location: Boston, USA
Posts: 2,701
I've noticed that my car seems to shudder a bit at low rpm in 1st. I noticed today that, when I revved it to about 1,600 rpm it ran fairly rough....almost like a cylinder was missing. Now, the car's definitely not down on power (not long ago ran the 1/4 in 14.1 @ 100 mph on a hot day), and it idles perfectly. It also runs thru the rpms real smooth, with the exception of that one rough spot.

Is this typical, or is the car indeed not running right? Could it be the fuel injectors (car has 53k mi)? Faulty plug wire?

Any advice appreciated.



------------------
Best regards, Michael
'92 500E
'88 300TE

  #2  
Old 10-01-1999, 09:51 PM
Registered User
 
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
Have the engine put on an ignition scope by a Mercedes Tech. Be careful not to let them do any adjustments that are not needed. If it needs the resistor tips or the dist. caps or rotors, do them.

------------------
Benzmac:
1981 280GE SWB
1987 16V
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM


  #3  
Old 10-01-1999, 10:43 PM
TommyMB
Guest
 
Posts: n/a
You probably have one slightly plugged or bad (resistance) injector. Try a bottle of Redline injector cleaner to see if they problem goes away.

If that doesn't work, put the engine on the ignition scope to identify which plug/injector/wire is bad and replace as needed.
  #4  
Old 10-04-1999, 03:26 PM
Registered User
 
Join Date: Jun 1999
Location: Pasadena, Cal. USA
Posts: 64
I have also heard, but cannot substantiate, that 500E motor mounts can fail a la Porsche 944 mounts. That would also account for a feeling of roughness, at idle and slightly off idle.
  #5  
Old 10-05-1999, 08:21 PM
Michael's Avatar
Veteran
 
Join Date: Jul 1999
Location: Boston, USA
Posts: 2,701
I'm gonna have an ignition scope thrown on it for good measure, and have the motor mounts looked at by a Senior Tech I hooked up with who does work on the side. Will post the resolution.

Thanks for the input gentlemen!

------------------
Best regards, Michael
'92 500E
'88 300TE

Closed Thread

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
500E Seat Vibration placo1 Mercedes-Benz Performance Paddock 4 04-09-2002 11:19 PM
Mercedes 500E : The 4-door Porsche Jim_Crews Mercedes-Benz Used Parts For Sale & Wanted 2 01-14-2002 10:49 AM
500E Original Road Test Index <v. long> Chris W. Mercedes-Benz Performance Paddock 10 10-09-2001 06:34 PM
vibration 500E tjoepie Mercedes-Benz Performance Paddock 8 10-08-2001 06:37 PM
500E Driveshaft Vibration Bryan Harter Mercedes-Benz Performance Paddock 18 08-23-2001 01:20 PM



All times are GMT -4. The time now is 07:09 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page