|
|
|
#1
|
|||
|
|||
i am having an engine leak in front of the engine.
i changed the valve cover gasket and that is ok but the leak continues. oil drips on to the compressor and then on the floor. is it the front seal??? if so is it a big job to change it? thanks benzmac your advise really appreciated. |
#2
|
||||
|
||||
Have you checked to see if maybe the vacuum pump is leaking? It is pretty much located in that area, above the compressor. Just a guess at what to look at Hope you find it.....and it's cheap! ------------------ '83 300D |
#3
|
|||
|
|||
Use a cleaner on the engine and then steam clean it well. Especially in the area of the Vacuum pump. The above is true, the front cover of the vacuum pump is probably leaking.
------------------ Benzmac: 1981 280GE SWB 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Oil Additives | Bill Wood | Mercedes-Benz Performance Paddock | 6 | 08-24-2011 10:53 AM |
Leak at my oil drain plug... couple of basic questions: | webwench | Diesel Discussion | 31 | 06-17-2009 12:31 PM |
M103 Oil leak or burning? | lino | Tech Help | 111 | 11-03-2005 07:18 AM |
Oil leak after engine off and grind in front end | NC240D76 | Tech Help | 4 | 10-13-2004 07:11 PM |
My semi-definitive oil post | JHZR2 | Diesel Discussion | 0 | 01-21-2004 12:25 AM |