|
|
|
#1
|
|||
|
|||
My front passenger seat on my 126 is fronzen in posion
when the swith is engaged all i hear is the moter whine currently it is stuk all the way up front is there any way to manualy move it back so ppl can at least sit? also my front passenger window died when the switch is engaged i hear a faint tick butnothing happns any suggestions? |
#2
|
|||
|
|||
It sounds as though both are trying to work. In other words the electrical portions are in good working order. The seat will have to be taken out and repaired from the bottom. The cable is probably the problem. The window motor is likely stuck or the regulator is jammed. In either case the door panel will have to come off.
------------------ Benzmac: 1981 280GE SWB 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
'94 E320 power window stuck open | Robby Ackerman | Tech Help | 3 | 11-13-2004 05:00 PM |
window stopped working, motor is fine | adiel | Diesel Discussion | 10 | 03-10-2004 07:58 PM |
Window Problem | pshibly | Tech Help | 2 | 07-06-2003 04:38 PM |
560SL seat rebuild (a bit long) | cbdo | Mercedes-Benz SL Discussion Forum | 0 | 02-08-2003 08:57 AM |
86 190E 2.3 - Tach, clock affected by fastening seat belt | DieselGuy | Tech Help | 5 | 01-22-2003 01:51 AM |