Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-24-2003, 01:54 AM
hedpe's Avatar
Registered User
 
Join Date: Oct 2001
Posts: 507
euro style, blinkers off until activated?

Hey guys, I noticed while I was in europe that the corner lights are completely off when the headlights are on, until they are activated. Is this possible to rig on american mercedes? aka...my W124

__________________
Own:
2013 C300 4matic
2009 C300 4matic

Owned:
2001 E320 Sport
1992 500E
1989 300SEL
Reply With Quote
  #2  
Old 01-24-2003, 02:31 AM
MTI's Avatar
MTI MTI is offline
Registered User
 
Join Date: Nov 2002
Location: Scottsdale, Arizona
Posts: 10,626
European laws don't require the outside markers to be lit, but they do have the city lights. US DOT requires orange corners in the front. Obviously, you could mask the electrical contacts on the dual filament bulbs so that the running lights don't come on, only the blinkers, just remember to undo the masking when you're going in for inspection.
Reply With Quote
  #3  
Old 01-24-2003, 09:15 AM
Registered User
 
Join Date: Feb 2002
Location: Orlando, FL
Posts: 788
Yeah, all ya gotta do is unplug the third prong on your turn signal holder. But..why would you want to do that? Doesn't hurt anything, and it, supposedly, makes the car safer because it is more visible at night from the side. Just wondering.
__________________
'86 420SE Euro
904 Midnight Blue, Gray Velour
Dad bought it new, now I own it.

"A Mercedes-Benz is like a fine wine, it only gets better with age."
Reply With Quote
  #4  
Old 01-24-2003, 11:44 AM
Female Pimp
 
Join Date: Jun 2001
Location: Bay Area
Posts: 458
It can be done and has been done. Check with Brabus over at bnzsport.com
Reply With Quote
  #5  
Old 01-24-2003, 02:07 PM
goldenbear's Avatar
Registered User
 
Join Date: Mar 2001
Location: NorCal
Posts: 442
I recently achieved this very look with my euro lights. I ran pin 4 (dim setting) from the side marker wiring assembly to pin 58 in the 6-pin wiring assembly for the euro headlamp assembly. This now powers my city lights in light switch position 1.

If you don't have euro lights, you could simply disconnect pin 4 in the side marker wiring assembly. However, this would result in NO lighting up front unless the headlights are on.
__________________
Chris

'04 ML500 - 53k, Inspiration Edition, Desert Silver
'11 Audi A4 Avant - Brilliant Black
'87 300SDL sold
'99 C280 Sport sold
'85 190E 2.3 sold
Reply With Quote
  #6  
Old 01-24-2003, 05:17 PM
Registered User
 
Join Date: Feb 2002
Location: Orlando, FL
Posts: 788
I did the same thing, I ran it into the 6 pin to run the city lights, but I also made a "Y" out of that wire. One end running to the 6 pin plug, the other running to my turn signal marker light. You can buy a push type plug from AutoZone that will fit the post perfectly. That way I have the city lights AND the side marker light....don't have to worry about being seen from the side...or the law.

__________________
'86 420SE Euro
904 Midnight Blue, Gray Velour
Dad bought it new, now I own it.

"A Mercedes-Benz is like a fine wine, it only gets better with age."
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page