SLC W107 cars have plastic louvers/grills on each side of the back glasswork. These are painted silver and normally start to peel after some years in the sun. The louvers are sandwiched between to fixed panes of glass. Does anyone know the propoer procedure to access these louvers for restoration?
|
Unless you are very intuitive, you'll need a service manual. However, the basic steps are: 1)Remove rear side wall 2) Remove molding strip above and behind shutter 3) Remove 4 screws holding shutter assembly.
Step 1 requires removing the rear seat and backrest, chrome trim strips at door and window, 3 screws at back side of panel Step 2 requires a similarly detailed set of removals Step 3 is the easy part. Good luck, Bruce |
Joseph,
I say a very detailed solution to your problem on the net. Give me a few hours to find it. regards ed maddock. |
Joseph,
Try //mercedes.pair.com In the searchable archives search under slc and you should find what you want. If you have any problems let me know and I can mail it direct to you. Regards Ed Maddock. |
All times are GMT -4. The time now is 10:00 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website