Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 02-02-2003, 03:13 PM
Posts: n/a
How tough is it to swap out the trans modulator in a 116?

I have a 450SEL that shifts hard between 1st and 2nd.

I'm assuming it's either the modulator, or the vacuum going to the modulator.

Because the modulator probably has never been replaced, I was thinking of just swapping in a new one. How hard is this to do? I can't find any info on Mercedes trannys.

Reply With Quote
Old 02-02-2003, 05:56 PM
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
I would try adjusting it first. Unless fluid comes out when you remove the hollow bolt.

The original modulators had a steel line to them with a banjo fitting and hollow bolt. Remove the hollow bolt and use an allen wrench down the middle to adjust. Try a turn counterclockwise.
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 11:51 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page