Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-02-2003, 05:46 PM
Registered User
 
Join Date: Oct 2002
Location: Alaska
Posts: 33
Severe Hesitation in 420SEL 1989

OK, when the car has been sitting for atleast 6 hours or more and I start to drive the car, the following happens
As long as the temperature is below 70 degrees it hesitates between 2000 and 2500 rpm's. It hesitates quite heavily more like jerks, and there seems to be severe loss of powere during this time. However as soon as the temp gauge reaches the 70 degrees mark (just below the 80 dgrees) it seems that the car is as if on a turbo (the power comes back and evrything is fine). The car has 178K miles and I used sythetic oil for the first time in this kind of a cold weather in Alaska (i.e. first time synthetic and first time cold weather, the car was in Texas before). The outside temperatures are in the 20's. Any ideas/suggestions/advice etc would be greatly appreciated. Thanks in advance

Sohaib

Reply With Quote
  #2  
Old 02-02-2003, 05:49 PM
Moderator
 
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
Probably secondary ignition: plug wire ends or cap and rotor.
__________________
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician
Reply With Quote
  #3  
Old 02-04-2003, 12:41 AM
Registered User
 
Join Date: Oct 2002
Location: Alaska
Posts: 33
But would a tune up related probelm be temperature related? If so why?

Thanks
Sohaib
Reply With Quote
  #4  
Old 02-04-2003, 10:54 AM
Moderator
 
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
Secondary voltage is heavily determined by load. The voltage goes up to satisfy demand. If the circuit is deficient the greater the voltage the more likely a break down.

During cold running the possibility of moisture related shorting to ground reduces the voltage necessary for such.

The combined properties add up to the highest likelyhood of secondary break down being cold. Load is highest and resistance is lowest.
__________________
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician
Reply With Quote
  #5  
Old 02-04-2003, 07:29 PM
Registered User
 
Join Date: Oct 2002
Location: Alaska
Posts: 33
Thanks steve, I think I shall be doing a tune up pretty soon.

Sohaib

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 12:03 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page