|
|
|
#1
|
|||
|
|||
Benz 300 SEL no heat..
car at my shop, Wind blows in the cabin, but no heat, even it is the hottest temperature.. I'm guessing the switch, might costs $700 canadian.. hmm.. any thoughts? heater core?
|
#2
|
||||
|
||||
Tabo:
Hi, I just moved this post from the ML forum, it doesn't belong there. I would say that probably the rubber bellows is torn or has a small hole in it in the mono-water valve. Gilly
__________________
Click here to see the items I have up for auction at EBay Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold) |
#3
|
|||
|
|||
Had same problem, as the previous post mentioned, a $50 monovalve fixed the problem.
Hope this helps Sohaib |
#4
|
||||
|
||||
(See Tabo, you get responses if you post in the correct area)
I assume Sohaib installed just the repair kit, the whole valve I believe is more than $50. Gilly
__________________
Click here to see the items I have up for auction at EBay Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold) |
Bookmarks |
|
|