|
|
|
#16
|
||||
|
||||
ILUVMILS
I'll definitely check that out -- anything to avoid unnecessary work.
__________________
2008 E350 4matic / Black/Anthracite ------------------------------------ Gone but not Forgotten: 2001 E430 4matic, 206,xxx miles, Black/Charcoal 1995 E320, 252,xxx miles, Black/Grey 1989 260E, 223,00 miles, Black/Black |
#17
|
||||
|
||||
Hey Eric, never mind. I checked at work this morning. 124 washer bottles/parts are only available separately,at least at the dealer. It might be worth checking out after-market stuff though. Good luck
|
#18
|
||||
|
||||
Okay,
I reassembled the thermovalve. Seems the spring and two cylindrical brass(?) parts had popped out. Water now flows through the coil with no apparent leaks. I am a bit concerned though, since I do not know how much pressure it will withstand once hot coolant is flowing again. Would there be any harm in removing the guts (just the spring, really) of the thermovalve until I get a replacement?
__________________
2008 E350 4matic / Black/Anthracite ------------------------------------ Gone but not Forgotten: 2001 E430 4matic, 206,xxx miles, Black/Charcoal 1995 E320, 252,xxx miles, Black/Grey 1989 260E, 223,00 miles, Black/Black |
Bookmarks |
|
|