W124 Radiator Expansion Hose
Hi,
Has anyone replaced the small right-angled connector that is inserted into the radiator near the top hose? This is the connector which is used for the hose to the expansion tank. Mine is leaking slightly, so I bought a new one, however from the looks of it, it is designed to be inserted, but not removed! Anyone replaced one of these without trashing the radiator tank? Regards, Richard 1989 W124 300E |
Take off the upper hose (with the engine cold) and use a the box end of a 9mm wrench to compress the tabs. It will pop right up!
|
All times are GMT -4. The time now is 11:03 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website