ML transfer case - Neutral Position?
ML Transfer Case has only Low and High. Theoretically, is it possible to put it in neutral either manually by turning the shift motor or shaft by hand, or electrically by disconnecting control module and using some kind of electrical device to rotate motor half way? What is the purpose of 4 position wires from the position encoder?
I'm looking at the picture in the manual, and it looks like there is enough space for the sliding reduction hub to stay without engagement in between two "legal" positions. Thanks, Mike |
1 Attachment(s)
To illustrate my question - pictures A and B from the manual:
A - High ratio 1:1 B - Low ratio 2.64:1 1 - Input Flange 2 - Intermediate Flange 11 - Reduction Hub 13 - Shift Fork 18 - Planet Gear 19 - Planet Carrier Picture C is Photoshop edited to show hypotetical Neutral. Is it possible? |
MB bought the cheapest Borg-Warner transfer case made to keef the cost down! IF they were thinking they would have spent another $100. & gotten the BW transfer case with neutral designed for TOWING behind a RV.
|
All times are GMT -4. The time now is 12:24 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website