head bolts 190e, 2.3L
head bolts on 1992, 1903, 2.3L, do I need to replace the head bolts when I replace the head gasket or can I reuse them?
|
102 Head Bolts are TORQUE TO YIELD, which means they TORQUED in DIFFERENT STEPS and then ANGLE ROTATED a certain amount of DEGREES to STRETCH them.
The MANUAL has a SPECIFICATION for measuring them to determine if they are RE-USABLE . . . If the engine was OVERHEATED . . . REPLACE THEM ALL . . . PERIOD ! ! ! TIP: ALWAYS use the specs on the SHEET that comes with the set, if you're using AFTERMARKET gaskets . . . If you're using FACTORY gaskets, there may NOT be any specs with the set. If so, you NEED to get CURRENT specs, as they've been updated along with the gasket designs . . . |
don't have the specs, looking for a manual right now. Ordered new bolts and washers anyhow. Anyone have the torque specs for the head bolts on a 2.3 L 190e?
|
All times are GMT -4. The time now is 09:05 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website