w140 Rear Seat removal!!!! HELP!
 

I am changing out my HU in my 1992 300SD. I can't get the Rear seat UPPER cushion out. I have the lower cushion out, the 3 bolts holding the bottom of the upper cushion are out also. The 2 bolts under the first aid box are out alos. the cusion will hinge up, way up ( don't want to bend anyhting though) but it won't puch straight up or pull out. ANy ideas?

It is NOT a powered back seat.

Thanks
STEVE



Report this post to a moderator | IP: Logged

03-01-2003 11:55 AM

the saga continues
 

While i am waiting for a reply on the back seat I thought I would get the HU out and the interior covers off under the dash to run the wires!! NOT!!! I can't get the under dahs cover off of the drivers side>>> or would you recommend the passenger's side?

there is no FActory manual/CDROM fo rteh 140 chassis. I had one for the 126 chassis and it help alot with interior bits. I just dont want to pull to hard in the worng direction to undo these clips.


Steve



Report this post to a moderator | IP: Logged

03-01-2003 12:33 PM

the saga continues
 

While i am waiting for a reply on the back seat I thought I would get the HU out and the interior covers off under the dash to run the wires!! NOT!!! I can't get the under dahs cover off of the drivers side>>> or would you recommend the passenger's side?

there is no FActory manual/CDROM fo rteh 140 chassis. I had one for the 126 chassis and it help alot with interior bits. I just dont want to pull to hard in the worng direction to undo these clips.


Steve



Report this post to a moderator | IP: Logged

03-01-2003 12:33 PM