126 transmission rebuild, should I?
I have 89 300SE. Flaring occurs 2/3 3/4 gears. I have adjusted modulator pressure 6 turns and eliminated all of it except when cold and shifting for 1st couple of times. I do get pretty hard shifts now when warm.
I have rebuild several engines, and am mechanicly inclined, however have never rebuilt an auto transmission. Should I rebuild myself, and if so are a lot of special tools required, and does a new modulator valve come in the kits? Your response is appreciated. |
Have it rebuilt by specialist
I too have rebuilt engines and can do other heavy work, but I leave transmission rebuilding to the specialists. Take comfort in the fact that you can probably save a lot of money by pulling the transmission out yourself. It takes special tools to do some aspects of rebuilding. Make sure you find a GOOD specialist.
|
All times are GMT -4. The time now is 09:35 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website