PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   need more help/advice with 16v (http://www.peachparts.com/shopforum/tech-help/5923-need-more-help-advice-16v.html)

mauro 01-04-2000 08:56 PM

I just got my car back today I had the rear bearings changed on both sides. The mechanic told there were more problems at the drive shaft, differential area He told me that these three parts needed replacing 1) Drive shaft yoke 2) rubber coupler and 3) yoke bearing. I wondering Benzmac or anyone else could help with some info on this. What I am wonder if you could give some prices(estimates) on these parts and any others that you would need to do this repair and a estimate how much this would cost to take to the shop(Labor only). I am also wondering would this job could be do-it-yourselfer, not being a very difficult job.

Thanks in advance,
Mauro G.
87 190e 2.3-16

Benzmac 01-05-2000 08:34 PM

I have never had to replace the parts he is talking of. Why would the flange be faulty? I can understand the seal, but not the bearing. Give more details please. Not a do-it-yourself job by the way.

------------------
Benzmac:
1981 280GE SWB
1987 16V
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM



mauro 01-05-2000 11:16 PM

Well I guess I can start with the symptoms. Before I took the car to the shop to replace the rear wheel bearings. The car would make gringing,vibration, shuttering sound in moderate acceleration. If I eased in the acceleration It would not make noise, and I could get up to highway speeds.When I got the car back from the shop, the noise was much louder and even at light acceleration it still made noise.I even noticed it made a flapping sound for a while as if something was hanging loose on the drive shaft. Could it be the differential? As for the parts all he said the same thing. I talked to him to day.

Thanks,
Mauro G.
87v16v

Benzmac 01-06-2000 09:07 PM

I have had to do the flex disk, but never the shafts or bearings. Some thing is going on with this car I don't think I have seen before.

------------------
Benzmac:
1981 280GE SWB
1987 16V
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM




All times are GMT -4. The time now is 02:10 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website