PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Rot in my MB! (http://www.peachparts.com/shopforum/tech-help/5961-rot-my-mb.html)

Rick 01-09-2000 06:59 PM



Hi everyone!

I have a couple of questions which I hope can be answered.. My car is a 1974 350SEL Euro/4 speed.

1. When I go over a bump in the road, I can hear a loud "thunk" coming from the firewall area. I inspected inside the wheelwell, and saw that the metal that surrounds what looks to be the stabilizer bar bracket is all rotted away, and the bracket looks as though it has come loose from the firewall. Does this mean that the car is unsafe to drive? I have had this car going on 10 years now, and would hate to part with it!

2. In the rear wheel wells, there's some "bar" or link that fits in a cut out in the sheetmetal, towards the rear of the wheel. On both sides, the bar has popped out of the indent. Is this a safety consideration as well? There is some rust on the rockers, but I have seen plenty of these old MBs with corrosion down there. If you look at the body, it appears to be really sound, there is NO visible surface rust to be found, and the paint is very clean and shiny. What should I do about these problems with the chassis though? If there is considerable rust on the firewall, is there any solution short of replacing the entire piece of metal? How does the broken mount affect driveability and safety? Thanks in advance!

Rick, '74 350SEL

mbdoc 01-09-2000 08:25 PM

On the US models there was recall on the firewall cracking & P/Steering box falling off due to cracks in the frame rail. Guess it is safety related due to the fact that its a recall.

Rick 01-09-2000 11:45 PM


MB DOC,

Thank you for the information! Do you know if a Mercedes dealer would still honor the recall and perform the modification? Thanks again!

Rick, '74 350SEL

mbdoc 01-10-2000 10:23 PM

Since your car is euromodel it's not covered by MBUSA importing laws. Also the recall was for cracks not rust, see previous post. Repair costs would out-weigh replacement cost.


All times are GMT -4. The time now is 10:36 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website