|
|
|
|
|
#2
01-12-2000, 08:49 AM
|
|||
|
|||
|
A torn diaphragm on the mono-heat valve will do exactly what you describe. If its a European car with dual temperature wheels it has a heater valve with two inserts.The heater valve should be behind the false firewall to the right of the battery(looking from under the hood). It has 4 slot-head screws in the top that hold the insert in the housing. The insert costs around $30 and is easy to replace.
Regards, Randy D. 
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Heat Problem | dieselbeagel | Diesel Discussion | 2 | 11-19-2004 09:25 AM |
| Interesting Post on AC from the Ritter/Easley Board | ctaylor738 | Tech Help | 4 | 08-08-2003 06:36 PM |
| injector heat shields for a 300D - are they necessary? | Kent300D | Diesel Discussion | 13 | 09-19-2002 11:18 PM |
| New AC Servo and Amp, Still Full Heat | Elripster | Tech Help | 2 | 11-27-2001 09:35 PM |
| 84 300CD A/C Heat Problems | MikeL | Tech Help | 1 | 09-16-1999 09:30 PM |
Linear Mode
