Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 03-20-2003, 05:41 AM
Registered User
Join Date: May 2002
Posts: 45
126 alignment question

380SE -85. Replaced front upper control arms, rear subframe bushings, differential mount and trailing arm bushings. Went to an alignment and everything came out fine except rear camber. The rear camber is now: left +0.23, right -1.04.

What is the factory spec and is the rear too far from spec??
Reply With Quote
Old 03-20-2003, 08:23 AM
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
Should be around 0 deg +- 0.5 deg so the right side must be bent OR that spring is sagging. Is the rt rear lower than the rest of the car?
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
Old 03-24-2003, 05:47 PM
Registered User
Join Date: May 2002
Posts: 45
Thank you M.B.DOC. On the lift it seemed like the rt rear was little bit higher than the rest of the car. Makes me think that the right side is slightly bent. In use the difference between rt and lt is not visible. By the way the rear toe-in is 0.01 (spec from the Hunter table I received says should be 0.15...0.45).

The common sense says to me that these deviations from the spec are so minor that they does not affect to driveability. What do YOU think??
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 10:06 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page