|
I have rebuilt both Zeniths on my '71 250C and am looking for information on how to re-set the "travel" on the secondary diaphragms. Both have been replaced and I measured the number of turns it took to remove the diaphragms, but I just want to make sure that they are set correctly.
|
I checked the Zenith carb adjustments manual. No information is given about the rod length, just how to check and replace the diaphragms. It looks like the diaphragms used to come with the rods on them when this manual was published.
------------------ W.R.Durrance ASE Master Tech Mercedes Tech 19 Years |
| All times are GMT -4. The time now is 10:59 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website