PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   96 benz c280 (http://www.peachparts.com/shopforum/tech-help/60466-96-benz-c280.html)

halleffect 03-25-2003 12:10 AM

96 benz c280
 
I want to remove the instruments cluster to replace the light bulb
however I don't see any screw, is there a trick way to replace?

blackmercedes 03-25-2003 12:15 AM

The cluster pulls out. Your dealer has some specialty tools that make the job pretty easy. You slide in them in at the top on each side, and YANK.

Be careful not to break the cluster, as it's $$$$$$$.

Replace ALL the bulbs so that you're not doing it again soon.

BTE, is you find the job daunting, most dealers charge an hours labour in case you're curious.

halleffect 03-25-2003 11:47 PM

thanks you very much...
and I have one more question.
if I don't have any special tools. what will make the job easily?

pentoman 03-26-2003 06:15 AM

Coat hangers can be used.

Do a search on this site, someone posetd pictures of how to make something and how to use it to remove the cluster

good luck

JAndersson 03-31-2003 10:53 PM

Replace Instrument Cluster
 
Hi,

I have a 1994 C280 and I took it in to have the bulbs replaced. They told me that they had to remove the steering wheel in order to drop the instrument cluster out.

Hope that's helpful.

JAndersson

MAC10 04-01-2003 08:46 AM

I have a 95 C280 and recently replaced my temp bulb in my cluster. It was fairly easy, and I did not pull off my steering wheel or have any specailty tools. I pulled the tweeter cover to the left of the console and then pulled the tweeter off to the side. Next, pulled off the heater duct cover(under the tweeter)-it comes out with two screws then by depressing two small clips in the bottom of the heater duct cover. I then had enough room to fit my hand behind the cluster and carefully push it out. I did however, cut a small bit of coat hanger, fashioned a small loop on one end(to fit over my thumb) and the other end I bent over in a small catch, to aid me. Once I got it pulled loose, unclipped the two connections on the back, I was able to(at the correct angle) pull the cluster free.

hope that helps,

-M

halleffect 04-07-2003 12:41 AM

thanks for your suggestion.
I will try it.

halleffect 04-07-2003 12:46 AM

c 280 water pump
 
did any one replace the waterpump on the c 280 before?
do i have to replace the radiator? where is the belt tensioner?
and how do i remove the fan ?
i have lack of experience on benz however my parents just brought the car, therefore I have to fix it myself.

thank you

MAC10 04-07-2003 07:22 AM

Do a search on this forum, I think you will find someone that has done one.

-M

halleffect 04-07-2003 11:48 PM

I search it for long time
however there is nothing metion how to replace the waterpumps


All times are GMT -4. The time now is 01:06 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website