Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-31-2003, 06:43 PM
Registered User
 
Join Date: Mar 2003
Posts: 64
How to replace Air Flow Meter?

Hi all,

Well I finally tracked down a myriad of faults with my 2.5 16v. A nuked O2 sensor and an intermittant Air Flow Meter potentiometer. The 02 sensor has been replaced and now I'm onto the AFM. Can someone walk me through replacing this?

I'm getting a new unit from MB. Do I need to calibrate the Pot? I hope not - ? I suppose I have to centralise and set zero position on the plate? Also I guess I have to retune the Car. Am I ok too do this via EHA ma and pin 3 of X11? Are there any mechanical "gotchas" I should be aware of?

Cheers
Neil
1987 190 E
1989 190 Sport Evolution - 429 of 502
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 04:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page