PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   560 sel front end (http://www.peachparts.com/shopforum/tech-help/61192-560-sel-front-end.html)

Dhanda 04-02-2003 01:39 PM

560 sel front end
 
Have been reading past threads, but no joy. Evrytime I go over a pot-hole or bump I seem to get a thud like sound from the front end. Also I feel light tapping through the throttle pedel.

I am assuming the later to be engine mounts, but would be grateful If someone would confirm this or let me know what it could be. As for the first question I suspect the subframe bushes
and was thinking of replacing them ,but please do tell, if it might be something simpler. By the way if it was the bushes, do thay just come out or will thay have to be pressed?

Appreciate all replys ,Thanks.

1992300e 04-02-2003 01:51 PM

Have you eliminated the obvious possiblities?

jacking front of car up (use jack stands) and wiggle wheel feeling for support joint (ball joint)?

Check sway bar bushings, etc.

Joel

Dhanda 04-02-2003 01:57 PM

I have arranged a time with a friend who will let me use his 4 poster ramp. Then I can check the bits you have mentioned, most grateful ,thank you.

MikeTangas 04-02-2003 03:21 PM

Try doing a search on "guide rod mounts". I think you'll read about the symptoms you describe.

RKreutzer 04-02-2003 07:04 PM

1 Attachment(s)
Hi Dhanda,

this is how my motor mount and damper look at the driver side.
If your's is collapsed, it should look more compressed than this. I believe you get engine shake also from it.

There is a thread on how to change them, you need to lift the engine and need to watch the radiator.

Good luck

Reinhard Kreutzer

Dhanda 04-05-2003 05:00 AM

Thanks for the picture, I think you've nailed the problem for me.
My motor mounts are well low.

stevebfl 04-05-2003 03:54 PM

1 Attachment(s)
Motor mounts will definitely make noise, but not like you are describing. Mike has probably got it right and the only reason I mention it is you aren't listening to him and the problem can not be determined visually.

I can guarantee that if the boot is broken on the caster joint (as I call it - Mike calls it a guide tube mount) then it is bad. here is a picture (sorry about the size) that I pasted from this article:

http://www.continentalimports.com/ser_ic4232.html


All times are GMT -4. The time now is 11:53 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website