Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 04-14-2003, 08:17 AM
Registered User
Join Date: Oct 2002
Location: Montréal, Canada
Posts: 29
Unhappy Blower motor w124

!!Weird problem !!
The blower motor was not working. I checked the wiring going to the blower. The control wire (yellow) was putting out approx. 3.5 volts. I pulled out the blower motor. The bearings seemed to be the culprits. To make sure I oiled them and reconnected the blower.
It started running and would not stop even when the ignition key was turned off. Where does it get the power to run? There are three wires going under the blower motor ) black, red, yellow) and 2 wires coming out from the same area (red, blue) connecting to the blower motor.
Did I pull too hard on those 2 wires and cross connected something or did I break something else while removing the blower motor ?
Please help.
Also, does anybody know what is the size of the replacement bearings for this blower motor ? (w124 1988)
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 02:44 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page