|
|
|
#1
|
|||
|
|||
Masters of Electrical Connections
My last thread didnt make it , Ill try again does anyone know the color code to the round wire connector, the one behind the fuel and temp gauge in a 300e? I was going to replace a bulb and in removing the connection ( the one with 15- 16 wires connected to it) the connector separated and I had 6 to 8 wires pop out of it, I tried to carefully put them back in their respective holes but I didnt get it right, I have removed the cluster several time in the past and this never happened before.
Is there anyone who can direct me to a photo or even a wiring diagram of this connector, or possibly someone may know the color sequence to the numbered holes where these wires go. Please someone help !!!!!!! Thanks for everyones help.! __________________ "Eat lots of food, always" Report this |
#2
|
|||
|
|||
Benzodrene,
First of all this message is for everyone. In electrical questions, one must know the year of manufacture to give a good answer. I know "All 300E's" are the same, but when it comes to electrical, cars (all cars) change from year to year. So, If you will give the year of the car, I will look and see if I can help.
__________________
84 500 SEL (307,xxx miles) |
#3
|
|||
|
|||
Thank you Paul for responding, it is a 1986 300e any help you can provide is greatly appreciated, please see what you can find.
Again thanks, K.A. Smith |
Bookmarks |
|
|