My car is a 1994 C 250 Diesel, the front brakes are solid discs, I travel a lot with my car, and at high speeds (full trottle), the brakes give out to quikly, I mean it.I checked all the brake system, even the air ducts for the calipers, and its all Ok, I use OEM Parts only. I´m thinking about my security. Any sugestion about this?????
Last week a saw a 190D 2.5 Turbo, this car have the same top speed of my car, and have vent discs at front!!
Why a famous factory, like Mercedes Benz, make the same series of car, like the W202, with diferent brakes setup..?
I think that a car should have a oversized brake capability. Porsche thinks that way. Why Mercedes Benz not?
Thanks.
Jose Rios.

One thing you could do is use a better brake fluid. Make sure that when the brakes are flushed they are using the dot4 fluid. This will have a higher boiling point.
You should not be braking under full throttle this will make the rotors hot. I mean, let off of the accelerator first.

------------------
Benzmac:
1981 280GE SWB
1987 16V
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM

I´ll check the fluid in the next oil change, the ATE is a good one? any other sugestion??
Thanks