|
|
|
|
|
#1
06-18-2003, 01:40 PM
|
||||
|
||||
|
'72 350sl rotor question
on the distributor rotor they should have appx 5k ohms resistence which mine does. however there is no connection available from the center pickup out to the striker (the end of the rotor that strikes the dist. cap.)
so when dealing with resistors should i not be able to get a connection regardless of the voltage it can handle? the rotor i have is a rev limiting type. HELP! tks craig
__________________
Thanks Much! Craig 1972 350sl Red/Blk 117k 1988 420sel charcoal/Blk 140k 1987 420sel gold/tan 128k See My Cars at:http://mysite.verizon.net/res0aytj/index.html Pound it to fit then Paint it to match! There is only First Place and Varying degrees of last! Old age and deceit will overcome Youth and Enthusiasm every time! Putting the square peg in the round hole is not hard... IF you do it fast enough! Old enough to know better but stupid enough to do it anyway! 
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
