|
|
|
#1
|
|||
|
|||
c220 steering wheel
Does anyone know what size screws (or alen) are on the back of a 95 c220 steering wheel. I need to pull the wheel to get the gauge cluster out and I can't see up inside the little holes. Thanks
|
#2
|
||||
|
||||
Do you really need to pull the wheel off to get the cluster out? Most of us have been able to push the cluster out from the back and tilting the cluster up to clear the wheel.
|
#3
|
|||
|
|||
I tryed every angle, just a tad bit short of clearing th wheel.
|
#4
|
||||
|
||||
The rear bolts are torx head T30's, I think. That releases the air bag, then you'll need a 10mm allen head to actually remove the wheel from the shaft. They must have some hefty machine or a gorilla of a guy named Hans, because that 10mm is on tight!
|
#5
|
|||
|
|||
Thanks MTI
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|