|
|
|
|
|
#1
05-11-2003, 07:53 PM
|
|||
|
|||
|
noisy driveshaft inspected
i went to inspect my driveshaft today and i found that if hold the front of it tight and move the back part i can only feel like 1mm of play and a solid feel to it, but if i hold the back part and and move the front i can hear and feel like metal against metal from the big 41mm bolt and like 2mm of play
the noise is very loud, any ideas 
|
|
#2
05-12-2003, 04:13 PM
|
|||
|
|||
|
hheeeeeeeeelllllllllOOOOOOOOOOOOO
|
|
#4
05-12-2003, 05:36 PM
|
|||
|
|||
|
jaja jaja jaja jaja
|
|
#5
05-12-2003, 05:56 PM
|
||||
|
||||
|
What is the application?
I would recommend pulling it and having it checked out, repaired and balanced. Go ahead and replace the universal joint while it is out. I see you don't live around here and am not sure if there are companies around your area that rebuild driveshafts but I have used a company in Atlanta, Ga. USA called Driveline Service of Atlanta. They did a good job and it ran around US$250.
__________________
Jim
|
|
#6
05-12-2003, 07:56 PM
|
|||
|
|||
|
i dont think that the universal joint has gone bad, theres no play in it
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
