Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-13-2003, 05:23 PM
Registered User
 
Join Date: Nov 2001
Location: Oakland, CA
Posts: 94
Installing updated W124 corners question

Hey everyone,

Hate to bring up a topic that's been discussed a thousand
times over in various threads, but searching through all the previous
discussion on the topic only yielded confusion and a whole lot of
conflicting information.

I just ordered the Bosch clear/amber stripe corners to
update the look of my 92 300CE (going for the orange
striped version is just a matter of personal taste, I actually
prefer them to the completely clear corners - in case anyone
is wondering).

I'm a bit confused as to whether these particular corners
are supposed to look better by installing the amber lights
that come with it or by using clear bulbs instead. I won't
even get into the whole "painting the bulb silver" thing,
which, frankly, I never could get a handle on. Advise,
please?

Also, I've seen talk that by updating the corners you only
get the signal and hazard light functions of the indicators,
and that you lose the parking lights due to different
connectors/connections. Is this true even for the Bosch
lights, or does this only apply to aftermarket products?

I appreciate your help, as always. Apologies for my woeful ignorance on
a subject that has been discussed at length previously.

__________________
Zach
1992 300CE
Reply With Quote
  #2  
Old 05-13-2003, 05:43 PM
JCE's Avatar
JCE JCE is offline
Down to the Wear Bars
 
Join Date: May 1999
Location: So Kalifornia
Posts: 2,189
I put the Bosch orange stripe on mine - direct swap, same connector, everything that worked before works now (turn/parking, and hazard lights). The orange bulb was a DOT/Fed and State requirement at one time, I don't know if still true, but the orange bulbs are what I am using.
__________________
John

2003 Firemist Red/grey leather SL 500
2015 Palladium Silver/black mbtex GLK 350
1987 Smoke Silver/burgundy mbtex 300E Sportline (SOLD)

Click to see 87 300E
Reply With Quote
  #3  
Old 05-13-2003, 05:48 PM
Registered User
 
Join Date: Nov 2001
Location: Oakland, CA
Posts: 94
Thanks for the info, JCE! BTW, your headlights on the
300E look beautiful. I bet my car would look about ten
years younger if I could get a setup that looked that
good!
__________________
Zach
1992 300CE
Reply With Quote
  #4  
Old 05-13-2003, 05:57 PM
JCE's Avatar
JCE JCE is offline
Down to the Wear Bars
 
Join Date: May 1999
Location: So Kalifornia
Posts: 2,189
Thanks, Zach. Those are the Hella 500E lights from PUMA that I installed after someone trashed my MB factory euros taken from a grey market car. These lights loose the fog light, but gain long range driving lights and a chrome finish to the headlight surround behind the glass. I used the same connector without mods - the long range driving lights use the same H3 bulb as the original fogs, so I just use the fog switch to turn on the driving lights for now.
__________________
John

2003 Firemist Red/grey leather SL 500
2015 Palladium Silver/black mbtex GLK 350
1987 Smoke Silver/burgundy mbtex 300E Sportline (SOLD)

Click to see 87 300E
Reply With Quote
  #5  
Old 05-13-2003, 06:31 PM
ebennz's Avatar
Fire/Medic
 
Join Date: Nov 2000
Location: Hurricane, West Virginia
Posts: 878
Re: Installing updated W124 corners question

zach

people use both clear and amber bulbs for indicators.
personal pref or state law usually decides it.

'technically' you car came with clear bulbs, right?
amber corners,but clear bulbs. i suppose one could make this point if stopped for them.
show the officer your owners manual...

i have and prefer clear bulbs [standard wal mart,k mart, napa, pep boys].
IMHO it is 'rice' and looks like 'dung' to have BLUE turn signal bulbs.
those WILL get you pulled over 'most' everywhere.

i have never been questioned about mine.


the authentic 'euro' look and standard is front indicators come on when using turn signals and emergency flashers.

i'm attaching a pic of this look.

the land rover freelander and some older [u.s.spec] discoverys are set up this way.

you would have to make this modification.

do you have euros?

peter
Attached Thumbnails
Installing updated W124 corners question-citylightatnight2.jpg  
__________________
*92 400e 124.034, SOLD

*92 300e 124.030, SOLD
Reply With Quote
  #6  
Old 05-13-2003, 06:55 PM
Early Bird's Avatar
Registered User
 
Join Date: Feb 2003
Location: So. Cal.
Posts: 210
Sorry ZACH, but those CLEARS would look so good on your ride..........
__________________
Rich

1990 300CE
71 Chevelle SS 454
Reply With Quote
  #7  
Old 05-13-2003, 07:03 PM
Registered User
 
Join Date: Nov 2001
Location: Oakland, CA
Posts: 94
Rich -

I hear ya - some people really do prefer the clears, I know, but to my eye the contrast between the dark black paint and the shocking white clearness of the corners is just a bit overwhelming. I like the touch of color the amber stripe provides. Anyway, the completely clear corners would only emphasize how faded and yellowed my headlights are!

All of this is moot anyway, because JCE's 300E has convinced me that I need to follow in his footsteps and upgrade to those Hella 500E lights. For my checking account's sake, I really have to stop reading this forum.
__________________
Zach
1992 300CE
Reply With Quote
  #8  
Old 05-14-2003, 02:02 AM
azhari
Guest
 
Posts: n/a
Lose the orange strips...

Zach

Trust me. All whites will look sweet on your ride.

With regards to your headlamps, take 'em out and clean 'em really good.

The photo of my headlamp was taken AFTER i cleaned the insides and exterior of the lens.It was looking REALLY *****ty before that...all dirty and murky...

Cheers
Attached Thumbnails
Installing updated W124 corners question-dscf0001small.jpg  
Reply With Quote
  #9  
Old 05-14-2003, 09:12 AM
Registered User
 
Join Date: Jul 2002
Location: Dallas
Posts: 330
Azhari:

Please tell us more about cleaning the inside of your headlights.
Reply With Quote
  #10  
Old 05-14-2003, 09:53 AM
Early Bird's Avatar
Registered User
 
Join Date: Feb 2003
Location: So. Cal.
Posts: 210
Azhari, very clean looking front end with those euro's, but you would not believe the difference when you put chrome tape inside the light frame to make it look like the 500E. I saw that on other guys cars from the forum, and it looks outstanding. If you put mine next to a 500E, you would not tell the difference. Can not show you a picture, but maybe another person from the forum would be able to, like Alon (Ashman)..............
__________________
Rich

1990 300CE
71 Chevelle SS 454
Reply With Quote
  #11  
Old 05-14-2003, 10:42 AM
ebennz's Avatar
Fire/Medic
 
Join Date: Nov 2000
Location: Hurricane, West Virginia
Posts: 878
Quote:
Originally posted by 95E320cab
Azhari:

Please tell us more about cleaning the inside of your headlights.
azhari

euros have replaceable lenses. after awhile they get 'sandblasted' or may get a stress crack.

you have to pretty much remove the headlight, CAREFULLY pry the tabs that release the lense. then just clean the heck out of the inside.

it is something you might do 'yearlyish' [new word]


zach
do you have euros?

mine are also 500e lights.

check out the clear turn signal covers and side markers on this beemer.
clears do look pretty sweet on dark colors.

peter
Attached Thumbnails
Installing updated W124 corners question-98clear328ibmw.jpg  
__________________
*92 400e 124.034, SOLD

*92 300e 124.030, SOLD
Reply With Quote
  #12  
Old 05-14-2003, 01:46 PM
Registered User
 
Join Date: Nov 2001
Location: Oakland, CA
Posts: 94
Peter -

No, I don't currently have the Euro lights. I contacted PUMA yesterday, where JCE got his, and was quoted $449 for a set of the Hella 500E lights. I'm very tempted - after all, if I wanted to clean up the current look I have by installing new lenses and headlight rims, the cost of those parts alone would probably run to $250. Why not just upgrade the whole thing?

Can anyone tell me how daunting a job the installation of the Euros is? JCE?
__________________
Zach
1992 300CE
Reply With Quote
  #13  
Old 05-14-2003, 03:19 PM
Registered User
 
Join Date: Feb 2002
Location: South Eastern, MA
Posts: 1,743
The Puma lights are very nice, I have them on my car as well. You might want to talk to Paul @ Puma, he can get you clear corners for a good price if you buy the headlights.

The Euro's are not difficult at all to install. About three bolts, a snap ring at the top and they're off. Tape everything off before you start to prevent scratching the paint and you'll be all set. Do a search and you should find instructions.

Here's a shot of mine, you'll see that I actually modified my Euros to fit the stock wipers:
Attached Thumbnails
Installing updated W124 corners question-500efront-small.jpg  
__________________
Afshin

Current:
02 C32 AMG

Previous:
92 500E
84 190E 2.3 5 Spd
Reply With Quote
  #14  
Old 05-14-2003, 03:23 PM
Early Bird's Avatar
Registered User
 
Join Date: Feb 2003
Location: So. Cal.
Posts: 210
Zach, I'm sure you have heard this word many of times, EASY. That is how it is to upgrade to euro lights. The hardest part is the wiring, and that's easy too. Look in the Search option for euro headlights and you will find threads telling you how to do it. I was unsure myself at first, went for it and I LOL it was so easy.
__________________
Rich

1990 300CE
71 Chevelle SS 454
Reply With Quote
  #15  
Old 05-14-2003, 03:25 PM
Early Bird's Avatar
Registered User
 
Join Date: Feb 2003
Location: So. Cal.
Posts: 210
Looking HOT Afshin. Chassis detailed yet???????????

__________________
Rich

1990 300CE
71 Chevelle SS 454
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page