I dont have any problems yet (crosses fingers) that require a code pull, but would like to know how to do that in the future. I know from experience on some domestics that a paper clip is all you need on the horizontal code pull interface. I dont fancy doing this on my benz, and dont even see one in the cab. I found a round, capped port under the hood that looks like a VERY large SCSI or parallel port on a computer (for those computer geeks like me). Is this the proper place to pull?

Also, now that I have beat around the bush on it, where can I get a code puller for that and how much?

Thanks for any input!

Moparmike

__________________
http://comp.uark.edu/~dmgill/signature.jpg

There isn't any computer that has any kind of memory on the 1983 cars!
Does your car have a problem?

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

But I was wondering if there was a way to pull them. Is that the proper place to pull them if one occurs?


Err, I guess I am asking if htat is the diagnostic port.

Thanks,

__________________
http://comp.uark.edu/~dmgill/signature.jpg