Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-01-2000, 09:19 PM
DP
Guest
 
Posts: n/a
The ignition switch on my 300 SD froze in the off position. After 40+ minutes of wiggling and turning I finally got the key to move to the run position. What do I need to do, to replace the switch. I have two manuals and they differ greatly in what steps to take. Any suggestions are appreciated. Thanks

Reply With Quote
  #2  
Old 03-01-2000, 09:33 PM
metricman
Guest
 
Posts: n/a
The first, and most important step is to have the key in position 1 or 2 (run or acc.)
If the key cannot be turned then the whole steering lock assy. needs to be busted out and replaced. Since you have got the key to turn, the procedure is relatively simple.
The ignition tumbler has a small hole in which you insert a suitable tool, a sturdy paper clip does work in a pinch. Turn the key slowly back and forth until the tool slips all of the way into the steering lock. This releases the black collar, which should turn counter clock wise. It turns stiff at first. Pliers may be required to turn this collar at first. Later cars, 202 and 124 chassis, the collar pulls straight out when released, and uses two tools. The factory tool is a single wire bent at the middle.
Reinstalling reguires patience to align the tumbler and the collar. Good luck!

------------------
Reply With Quote
  #3  
Old 03-02-2000, 12:58 AM
unkl300d's Avatar
Registered User
 
Join Date: Jul 1999
Location: San Francisco, Ca
Posts: 2,468
Had similar problem. Replaced tumbler and steering lock. Do it PDQ before it gets stuck! Search the archives on this forum.

------------------
1979 300D
133K miles
1989 300SE
1995 C280

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
85 MB 300 DT - Power window switch Dcheng Tech Help 7 04-23-2007 03:43 PM
Ignition switch problem 560SL bhatt Tech Help 1 08-24-2004 04:18 PM
Red plastic soft top opening switch cracked. 300 SL 1990 clive w Mercedes-Benz SL Discussion Forum 4 05-15-2003 04:35 PM
Frozen Ignition switch don44 Tech Help 1 03-10-2002 11:27 AM
83 240D ignition dead-is there a Neutral Switch, where is it? Carrameow Tech Help 3 04-28-2001 11:30 PM



All times are GMT -4. The time now is 08:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page