Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 05-24-2003, 06:11 PM
Registered User
Join Date: Jan 2003
Posts: 6
Help Please!!! Aux. fan wouldn't shut off

Aux. fan wouldn't shut off on my 1990 300 E even after the engine is shut off. Here is what I did........
1. Finally I disconnected the battery
2. The next morning I put in a new temp. sensor, connected the battery, the aux fan still enganged.
3. Unpluged the plug to the didn't shut it off. Now I'm running the car with the aux. fan off ( I disconnected it at the connector )
What should I look at next?? Anybody with info please reply. Thanks a million.


Reply With Quote
Old 05-24-2003, 06:40 PM
haasman's Avatar
Registered User
Join Date: Jun 2001
Location: San Francisco, CA
Posts: 3,096
I had the same problem after the temp sensor went bad on the 190e. To stop the fan I found the fan connector near the AC receiver dryer bottle and disconnected it there.

I replace the temp senor, reconnected the Aux fans and the problem went away.

If you are replacing the sensor, be sure to get the one rated for your car. On close inspection the thermo rating is labled in small print on the metal of the sensor.

'03 E320 Wagon-Sold
'95 E320 Wagon-Went to Ex
'93 190E 2.6-Wrecked
'91 300E-Went to Ex
'65 911 Coupe (#302580)
Reply With Quote
Old 05-24-2003, 07:13 PM
Registered User
Join Date: Jan 2003
Posts: 6
Thanks for your reply. Yes, I had disconnected the fan at the connector you mentioned and also replaced the temp sensor but when I connected the battery ( after putting in a new sensor ), the aux fan was still enganged, but what I didn't try doing was starting the engine and then turning it off.
Reply With Quote
Old 05-27-2003, 10:22 AM
csnow's Avatar
Registered User
Join Date: May 2002
Location: Mass
Posts: 1,127
Seems I am having the opposite problem in my thread:
aux fan 300E

Perhaps info on my thread will help you.
Even if a relay is stuck, or the sensor wire has a short, I am surprised that the fan can get power with the ignition off, since mine cannot. I do have an older model, so perhaps it is a different deal.
1986 300E 5-Speed 240k mi.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 04:09 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page