|
|
|
|
|
#1
06-01-2003, 02:29 PM
|
||||
|
||||
|
16v supension self leveling
hey,
Does anyone know where to get the block off plate to the self leveling pump on the 16v engine. I was thinking nice new blistien sport shocks must be better then the stock station wagon shocks, lol, has anyone does this?? thanks Dave 
|
|
#2
06-01-2003, 03:02 PM
|
|||
|
|||
|
Just about every V8 had one of the plates. At least everyone that didn't have pump; which was about every 450,380,and 420 out there.
__________________
Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician
|
|
#4
06-02-2003, 12:06 PM
|
|||
|
|||
|
No I would never by pass that system. I have plugged the hole on a number of applications that use that pump. The same pump is used for every engine back to 115. For US use just the 100, 102, 117 5.6, and the 617 motor used the pump number 117 230 00 64.
I'm not sure what you ned to remove but the cover has a part number 116 015 02 09 w/gasket 117 015 00 80.
__________________
Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician
|
|
#5
06-02-2003, 03:30 PM
|
|||
|
|||
|
www.bekkers.com and www.delsingmotorsport.com both sell block-off plates for the 16v
__________________
'94 W124.036 249/040 leder; 8.25x17 EvoIIs '93 W124.036 199/040 leder; 8.25x17 EvoIIs, up in flames...LITERALLY! '93 W124.036 481/040 leder; euro delivery; 8.25x17 EvoIIs '88 R107.048 441/409 leder; Euro lights '87 W201.034 199/040 leder; Euro lights; EvoII brakes; 8x16 EvoIs - soon: 500E rear brakes '70 R113.044 050/526; factory alloys; Euro lights
|
|
#6
06-02-2003, 04:00 PM
|
|||
|
|||
|
Well the cover and gasket at the second site are pictured and if you rather anodized aluminum to the cad plated steel that MB uses it might be worth almost twice the price.
__________________
Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician
|
 |
| Bookmarks |
|
|
Linear Mode
