Is there some reasonable way to increase height of inner armrest on 300D driver seat? I don't mean to fold it up - I mean to have it higher in deployed position so that my arm can rest on it without my having to bend downward. Inner armrest on my 91 350SDL is considerably higher - just right to rest my arm on it with hand on steering wheel - helps me steer with very small and precise movements of hand, wrist, etc.
Surely there must be some waay to bring this armrest up to meet my folded arm, instead of having to push arm way down to an uncomfortable position to touch the armrest. Any tips? TIA ------------------ Wilton Strickland Goldsboro, NC 91 350 SDL. 81 300D |
If you take off the armrest and disassemble the locking mechanism, you may be able to see what is failed. It is usually the little rubber bushings.
------------------ Benzmac: 1981 280GE SWB 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
BENZMAC,
Thanks for reply, but has the armrest mechanism failed? In deployed position, it is NOT below horizontal and does not feel sloppy, worn, etc. ------------------ Wilton Strickland Goldsboro, NC 91 350 SDL. 81 300D |
All times are GMT -4. The time now is 09:57 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website