|
|
|
#1
|
|||
|
|||
Hi. I'm looking to check the waste gate on my 82 300SD and was wondering if anyone out there knows how to adjust it and what the specs are.
Thanks in advance. ------------------ Dave. 82 300SD |
#2
|
|||
|
|||
The easiest way to test the boost is to tee into the boost signal line at the overboost protection switchover valve on the firewall. Antwhere from the intake to the aneroid on the injection pump should have the same pressure. The pressure should be controlled to 9-10psi. Any lower suspect: plugged line before gauge, bad turbo or stuck open waste gate. Any higher look for a bad signal hose to the wastegate.
The waste gate isn't adjustable except for the ammount it opens. It works against a set spring pressure. ------------------ Steve Brotherton Owner 24 bay BSC Bosch Master, ASE master L1 26 years MB technician |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Waste Gate Valve Adjust Kit | TomJ | Diesel Discussion | 15 | 07-24-2004 01:01 AM |
Looking for waste gate and Egr valve. | dieselkid | Diesel Discussion | 1 | 08-28-2003 11:15 PM |
W116 300SD and W126 300SD comparison? | ericnguyen | Diesel Discussion | 11 | 07-11-2003 01:11 AM |
Waste gate on 87 300D | kevinaw | Diesel Discussion | 1 | 10-18-2002 07:30 PM |
Desperately Seeking a 300SD!! | diesellady | Diesel Discussion | 14 | 08-28-2002 01:19 PM |