Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-14-2003, 08:13 PM
ZorroAMG's Avatar
Registered User
 
Join Date: Dec 2002
Location: Calgary, Canada
Posts: 131
Angry Grrr! :(

My 1990 300E has been overheating and had some odd voltage issues of late. I just spent $1000CDN yesterday replacing the belt, auto belt tensioner and viscous fan clutch and did a coolant flush, which were all recommended by my tech. 20 min later my car was overheating again and today my voltage went wonky again: my ABS light came on, my stereo flickered so I shut off the AC to reduce the draw, which helped. I replaced my altenator in October and it checks out...WHAT can I do? I am going back on monday to have them fix it, hopefuly free of charge. They cannot take out the new parts they claimed were the culprit can they? I need some firepower to come at them with, so please help

I have a stereo, subs and 3 amps, would a Capacitor help my voltage issues or should I upgrade altenators like RUN and others are doing/have done?

Reply With Quote
  #2  
Old 06-14-2003, 10:32 PM
Registered User
 
Join Date: Mar 2003
Location: Milwaukee Wisconsin
Posts: 1,150
Hard to see the future is. But sometimes an electrical problem like this can be traced to corroded cables at the battery. I don't mean just at the connector posts, but further up inside the cable. I had a positive cable which looked great, but under the plastic insulation, about half the copper had turned to green powder for a lenght of 3 inches. You might also want to inspect the heavy jumper cable which runs between the battery negative post and the car chassis as well as the heavy cable which jumps between the chassis and the engine block. Now I don't believe corroded cables alone could cause the car to overheat; unless perhaps there was insuficient current to run an electrically driven radiator fan. All your high power stereo stuff should connect directly to the battery and not share any circuits with other gear. My old 68 AMC AMX had an amp meter in the battery circuit. One glance at the meter would tell you exactly what's happening in the charging circuit and battery. Today they just give you a meaningless light. Good Luck. Tod
__________________
Resistance is Futile.
Reply With Quote
  #3  
Old 06-15-2003, 05:54 AM
J.HIDALGO's Avatar
Registered User
 
Join Date: Jul 1999
Location: Jax, FL
Posts: 1,785
Check ALL your grounds around the battery and alternator!

You may want to go to a "more powerful" alternator. I know the later 124's had the improved alternators. Do a search!
__________________
J.H.
'86 300E
Reply With Quote
  #4  
Old 06-15-2003, 11:32 AM
Super Moderator
 
Join Date: Apr 2000
Location: Falls Church, VA
Posts: 5,318
When does it overheat? At idle or while driving?

Did you replace the thermostat?

Sounds like you also have a loose and/or corroded wire somewhere.

__________________
Chuck Taylor
Falls Church VA
'66 200, '66 230SL, '96 SL500. Sold: '81 380SL, '86 300E, '72 250C, '95 C220, 3 '84 280SL's '90 420SEL, '72 280SE, '73 280C, '78 280SE, '70 280SL, '77 450SL, '85 380SL, '87 560SL, '85 380SL, '72 350SL, '96 S500 Coupe
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 12:33 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page