|
|
|
|
|
#1
06-24-2003, 08:29 PM
|
||||
|
||||
Trunk Lock Tumbler Removal?
Well, I figured out how to replace the door and ignition tumblers with no help from the CD manual. Dose anyone here have experiance with the trunk tumbler? I can't figure it out!
Thanks in Advance! Adam
__________________
Current Stable: 01 ML55 AMG 92 500E (a few mods) 87 300E (lots of mods) 00 Chevy 3500HD Diesel Box Truck 68 18' Donzi Marine  06 GT i-Drive7 1.0 Mountain Bike (with GPS!  )PREVIOUSLY OWNED:83 300SD, 87 420SEL, 88 420SEL, 90 420SEL, 86 560SEL, 86 190E 2.3-16V AMG, 94 E320 
|
|
#2
06-26-2003, 08:31 PM
|
||||
|
||||
|
TTT
__________________
Current Stable: 01 ML55 AMG 92 500E (a few mods) 87 300E (lots of mods) 00 Chevy 3500HD Diesel Box Truck 68 18' Donzi Marine 06 GT i-Drive7 1.0 Mountain Bike (with GPS! )PREVIOUSLY OWNED:83 300SD, 87 420SEL, 88 420SEL, 90 420SEL, 86 560SEL, 86 190E 2.3-16V AMG, 94 E320
|
|
#3
06-28-2003, 05:01 AM
|
|||
|
|||
|
Looking at the replacement I will install in the next week or so, the most likely access point to remove just the tumbler is from this hole on the side opposite the latch
Is replacing the door tumblers as straightforward as it sounds in Haynes?
|
|
#4
06-28-2003, 05:45 AM
|
|||
|
|||
|
After playing with the lock assembly, it seems I am in error.
The rear of the assembly slides off in the direction of the arrow in the pic.
|
|
#5
06-28-2003, 05:48 AM
|
|||
|
|||
|
This circlip may be what you are looking for
|
|
#6
06-28-2003, 11:40 PM
|
||||
|
||||
|
zhandax,
WOW, Thanks a lot! Those pictures are a big help! now I know what I am dealing with. The door and ignition locks were a snap! Please feel free to email me if you have any questions on installing them. Thanks Again! Adam
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
