Anyone knows how to remove the "Heating water feed line w/ fuel heat exchanger" on a 603 engine. Mine has a pinhole size in which water escapes so I can't use the car.
Is there a special too to remove the size 32 nut bolted to the block where the LINE is attached to? or do I have to take out the intake manifold to remove this. The part number of the LINE is 603 200 02 52. This is what I want to remove so I can have the leak welded. Thanks! Francis |
The line should pull out when the clip is taken out. The nut doesn't have to I think. There is usually an o-ring behind there.
------------------ Benzmac: 1981 280GE SWB 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
Hey thanks there! That would definitely make my life easier! I'll try to give it a puill later. Hope it comes off. Francis |
Worked! Thanks for the great tip!
Can I put grease on the O-ring when I put it back on? Francis |
Yes, a little will do fine.
------------------ Benzmac: 1981 280GE SWB 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
All times are GMT -4. The time now is 04:03 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website