Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-04-2003, 01:59 PM
Registered User
 
Join Date: Oct 2003
Posts: 1
Climate Control Part Numbers

I need to replace certain climate control parts on my 1997 MB E420.
The MB Dealer has said my Blower Motor Regulator is bad. The heating and Air Conditioning System works, but the fan speed usually will only operate on low, even if it is manually turned up higher. Theyv'e said certain parts are no longer available and require replacement of the blower motor, blower regulator, and cover/ bracket.

I took the blower assembly out from under the dash (passenger side feet compartment).

What I found is the following:
Grey Metal Blower Mounting Plate:
94.491.50.056 128 431 F.1/2

Black Wiring Harness w/ Heat Sink:
90.943.02.385 9 140 010 179 30 669

Blower Motor:
Bosch 0 130 111 043 DPD 12V 3351 670 (058)

BLACK PLASTIC FAN:
11 023 >PA+PP-6F 35<

The VIN for the car is:
WDBJF72F8VA292395

I am not sure where to find the "Blower Motor Regulator". I thought it plugged directly into the blower motor, but all I've found is the wiring harness that plugs into the motor. If this is found elsewhere, please advise.

Please let me know what are the corresponding part numbers.

Thank you,
Gary

Reply With Quote
  #2  
Old 10-04-2003, 05:44 PM
Moderator
 
Join Date: Mar 2000
Location: Gainesville FL
Posts: 6,844
The blower regulator is a small black cube a little more than an inch on each side. It mounts to the blower and is no longer available from MB as they redesigned a poor part. Unfortunately the new part requires a new blower which makes the whole process rather pricey.

The cube is actually a large end stage amplifier and is the same as the junk one used on the 140 chassis. Behr has redesigned the 140 regulator and the packaging says it works for 140 and 210 chassis. Who am I to argue with a big company like Behr so I have been modifying the harness and using the Behr regulator on both 140 and 210 chassis.

__________________
Steve Brotherton
Continental Imports
Gainesville FL
Bosch Master, ASE Master, L1
33 years MB technician
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 12:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page