|
|
|
|
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
Does anyone know where to get a metal thermostat housing for 190 16V?
Does anyone know where to get a metal thermostat housing for 190 16V?
Thanks, Giancarlo
__________________
PAST MB's: 2006 E55 AMG | 1986 190E 2.3-16 |
#2
|
|||
|
|||
The plastic one shouldn't be used, MB dealers were supposed to pull ALL of them 7-8years ago.
Use a 102-203-03-17 with 102-990-00-88 & 915036-005100 and (2) of 007603-008100
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
||||
|
||||
Thanks MB DOC!
But what are all these part numbers?
__________________
PAST MB's: 2006 E55 AMG | 1986 190E 2.3-16 |
#4
|
|||
|
|||
The 102-203-03-17 is the housing. The other numbers are for the adaptor, hollow bolt & crush seals for the air bleed off hose on the top of the housing!!
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#5
|
||||
|
||||
The extra parts are for where the hose from the coolant tank connects to the top of the housing. The housing itself just has a threaded hole in the top with no way to attach a hose to it. Some models use the same cover, but no hose attaches to it, it connects to the radiator instead. Those models, like the 300E, would just use a solid bolt and a seal ring.
Gilly |
#6
|
||||
|
||||
Doc/Gilly - Does the non-16v 2.3 use the same same cover? If not what is the part number for the non-16v metal cover?
Changing my radiator soon, thanks! |
#7
|
||||
|
||||
oh I didn't know a metal cap was a upgrade for the 16v , I still have the plastic one on, how much will Phil charge for the parts to convert here at mercedesshop.com. I will do this also
|
#8
|
||||
|
||||
I have 102 200 04 17 for my current plastic cover...is there a metal replacement?
|
#9
|
|||
|
|||
MB number 102-200-03-17 is the metal one for the 8V engine.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#10
|
||||
|
||||
Thanks doc!!!!
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|