|
|
|
#1
|
|||
|
|||
I AM IN THE MIDLE OF REPLACING BRAKE PADS AND ROTORS ON 90' 300CE.
HAD JUST TAKEN OFF THE CALIPER ON THE FRONT PASSENGER SIDE AND UNSCREWED THE ALLEN BOLT THAT HOLDS THE ROTOR. IS THERE ANYTHING ELSE THAT I HAVE TO DO TO TAKE IT OFF? IT DOESN'T EVEN MOVE, I TRYED HUMMERING AND EVERYTHING ELSE THAT COMES TO MIND. HELP!!! DMITRY |
#2
|
|||
|
|||
On the '90 ce, you have to take off the caliper complete with the holding bracket. There is 2 19mm bolts that hold that on. It could be rusted on...Just spray with some good oil and let soak overnight. Use a big hammer from the back side and it will come off. You will not hurt anything. Clean the front of the hub with wire brush and use some anti-sieze compound or grease on it.
------------------ Benzmac: Donnie Drummonds 1981 280GE SWB 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Replacing front brake discs... | Ducati | Diesel Discussion | 8 | 12-27-2004 03:21 AM |
front brake diagnosis help please | djugurba | Diesel Discussion | 2 | 11-18-2004 11:42 PM |
Front Brake Disc Replacement | 94MEBEe320 | Tech Help | 1 | 05-10-2003 06:10 PM |
'90 300e 4matic front (brake) grinding | Dave Payntar | Tech Help | 2 | 01-25-2003 12:52 AM |
ML320 front brake pads | herbert | ML, GL, G-Wagen, R-Class, Unimog, Sprinter | 6 | 01-08-2001 10:42 PM |