|
|
|
|
|
#1
07-15-2003, 08:59 PM
|
||||
|
||||
|
How much vacuum? Steve,Larry
Tranny shifts a little rough so i turned the "T" in the modulator two turns.It now shifts a little better.My question is,how many turns on the "T" can i make without damaging the trans,and how can i tell if there is enough vacuum comming out of the engine?Since i do not have vacuum guage,whith the engine at idel,i put my finger on the vacuum port on the engine and feel nothing.
Last edited by 420benz; 07-16-2003 at 07:58 PM. 
|
|
#3
07-16-2003, 11:35 PM
|
||||
|
||||
|
No offense, but "I don't have a vacuum gauge" is not a reason to find another way to test your modulator. Get a vacuum gauge. They don't cost that much.
That said, you should see ~18" of vacuum at idle. Sixto 95 S420 91 300SE 87 300SDL 83 300SD
|
 |
| Bookmarks |
|
|
Linear Mode
