Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-18-2003, 09:51 PM
Scott500SEC
Guest
 
Posts: n/a
Paranormal Window Activity w140

Ok, here's a new one for me, after a relaxing dinner i returned to my 1992 300se and the passanger side rear window was half down. I know it was up, im not seeing things (i guess)! Well everything worked normally except it went up some and then back down when i tryed to raise it...the second time i pressed the express up button it did however roll all the way up, but why was it down? Any insight? Thanks in advace...

Reply With Quote
  #2  
Old 07-18-2003, 11:14 PM
Registered User
 
Join Date: Mar 2001
Posts: 326
This usually occurs when the window binds on the way up. Its a safety feature that is built in the system to prevent little heads from being cut off. The window will automatically roll back down. Clean the channel and lube with a quality silcone or other lube that is made for that type of material.
__________________
Scott Diener
89 300E
93 300E
92 Volvo 740 Wagon aka "Mutt mover"
Reply With Quote
  #3  
Old 07-20-2003, 11:58 AM
Scott500SEC
Guest
 
Posts: n/a
Thanks for your help...after lubing the tracks this has not happened again
Reply With Quote
  #4  
Old 07-20-2003, 05:04 PM
Registered User
 
Join Date: May 2003
Location: Long Island, NY
Posts: 83
If your car has the original rear window lift mechanisms there is a good chance that they need to be replaced due to a broken nylon link in the lift cables. I had to replace the lift mechanisms in both rear doors on my wifes '93 300SD. The replacement parts are about $70.00 each and are a vast improvement with the nylon part being replaced with aluminum. The windows would creep down gradually hitting bumps. I would just press them up and they would stay in place due to friction in the tracks. When I finally found out how to get the door panels off without breaking anything I installed the new parts. Door panel removal has been covered on this forum in the past. Use the search function.

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 04:24 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page