Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-12-2000, 02:06 PM
Mike Murrell's Avatar
Registered User
 
Join Date: Feb 2000
Posts: 2,580
I searched the archives for an answer to this question. Found two that both said to check engine oil level when engine was warm.

If an engine is stone cold(left sitting overnight), wouldn't ALL of the oil have settled to the bottom, thereby providing the
most accurate reading?

I suppose my problem is partly due to age.
I was taught years ago to always let the vehicle sit overnight, then check on a level
surface. Would appreciate some insight into this "check warm" philospohy. Thanks for your time.

Mike Murrell
Boerne Texas
'91 300-SEL
M103 engine

Reply With Quote
  #2  
Old 04-12-2000, 02:19 PM
Registered User
 
Join Date: Jan 2000
Location: New Bedford, MA USA
Posts: 1,583
Mike, generally folks don't like to wait for an overnight to check in AM, but if logic serves me, the longer you wait the better. However, having said that, there is the consideration that when an engine is warm, things will settle quicker, but, there will always be some oil tucked away somewhere. At any rate, either way will work. You're trying to differentiate between rather small quantities of lubricant. So check it in whatever fashion you are comfortable with. I suppose someone has done a white paper about this issue, but personally, I don't think it's really all that important. I would find something else to be compulsive about, like changing the oil every 3,000 miles.

------------------
Jeff L
1987 300e
1989 300e
1987 BMW 325
Reply With Quote
  #3  
Old 04-12-2000, 03:59 PM
Mike Murrell's Avatar
Registered User
 
Join Date: Feb 2000
Posts: 2,580
I change it every 1,500 miles. Oil breaks down a great deal between 2000-3000 miles.
Reply With Quote
  #4  
Old 04-12-2000, 04:21 PM
Registered User
 
Join Date: Jan 2000
Location: New Bedford, MA USA
Posts: 1,583
Doesn't get any better than that..

------------------
Jeff L
1987 300e
1989 300e
1987 BMW 325
Reply With Quote
  #5  
Old 04-12-2000, 04:54 PM
LarryBible
Guest
 
Posts: n/a
Mike Murrell,

My Man!!!! You definitely got it figured out.

Change oil hot and change oil often.

I don't have to wish you good luck, you're making your own luck with frequent oil changes.



------------------
Larry Bible
'84 Euro 240D, 516K miles
'88 300E 5 Speed
'81 300D Daughter's Car
Over 800,000 miles in
Mercedes automobiles
Reply With Quote
  #6  
Old 04-12-2000, 06:47 PM
Brian16V
Guest
 
Posts: n/a
About that "White Paper" study on this subject. I'm sure our government has spent millions of $ in grants only to find in a 24-hour period, about 3.703923019 ounces of oil will have dripped down to the oil pan.

A bit o' humor for the day

Brian
Reply With Quote
  #7  
Old 04-12-2000, 07:52 PM
Mike Murrell's Avatar
Registered User
 
Join Date: Feb 2000
Posts: 2,580
Larry - You are ABSOLUTELY right..change the
oil when it's HOT. All the sludge/junk washes out. My MB car is a low mileage vehicle; however, I have an old Toyota truck and an Accord that collectively have about 550,000 mi. on them. When I pull the valve covers off, you'd swear you were looking at a new head - no sludge - no cam galling - nothing that resembles wear or the kind of mileage I've logged.

Too bad so many folks don't realize that changing the oil when it's hot can add a TON of miles to the life of an engine.

Regards.

Mike Murrell
Boerne Texas
'91 300-SEL
Reply With Quote
  #8  
Old 04-12-2000, 10:06 PM
Deezel
Guest
 
Posts: n/a
On a slightly different but similar subject, why does an auto transmission dip stick have such a variance between the full hot and full cold line? I realize why it is important to check it with the engine running and in neutral, but why is hot impaortant? Does it expand that much?

Thanx!

------------------
Deezel
87 300TDT
150,000 miles

Reply With Quote
  #9  
Old 04-12-2000, 10:23 PM
Registered User
 
Join Date: Jan 2000
Location: New Bedford, MA USA
Posts: 1,583
When cold, some of the ATF will drain out of the converter back into the sump. When hot and running, the converter is full and there is less oil in the sump. The oil doesn't expand that much. The principle here is to make sure there is adequate ATF to completely fill the converter, otherwise, if air gets inside there, it will produce cavitation and will not perform it's intended function. The torque converter is the highest volume resevoir for ATF inside the tranny. Kinda like the engine. When it's running, a good part of the oil is everywhere but in the sump. It's your basic gravity thing...

------------------
Jeff L
1987 300e
1989 300e
1987 BMW 325

[This message has been edited by jeffsr (edited 04-12-2000).]

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OM603 - oil leak from exhaust port with new head! gsxr Diesel Discussion 40 01-29-2019 10:52 AM
Oil Changes: How the different sexes do things... moparmike Off-Topic Discussion 12 02-08-2007 10:14 AM
Low Oil Pressure, hot idle, on 1989 420 Cigar Havana Tech Help 8 09-29-2003 12:47 PM
A few oil change questions... (C280) David C Klasse Tech Help 11 07-29-2001 02:14 AM
90 300E oil level warning light Andre Tech Help 3 03-13-1999 02:26 AM



All times are GMT -4. The time now is 09:51 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page