Hi members,
Recently while replacing my fuel pump, I found a crack on the subframe on my 190. it crack at the joint that crosses the whole front and attach the front of the diff. I just wonder if I am the only one or if anyboby has that experience too. I had it welded and it doesn't seem there are any more problems. |
I stumbled across this interesting post and saw it did not have any replies. I replied to get it back near the top! Any one care to comment?
------------------ Deezel 87 300TDT 150,000 miles |
Under severe conditions one of anything can fail! Never seen any problem with rear subframe on any Benz. A good welding job should do just fine.
|
The only pattern failures with sub frames that I know of is the front subframe on early 107 chassis.
The only other subframe problems I have seen have been corrosion or accident (or both) related. ------------------ Steve Brotherton Owner 24 bay BSC Bosch Master, ASE master L1 26 years MB technician |
All times are GMT -4. The time now is 02:27 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website