PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   87420sel driver side window won't run (http://www.peachparts.com/shopforum/tech-help/71772-87420sel-driver-side-window-wont-run.html)

afmcorp 08-04-2003 12:33 AM

87420sel driver side window won't run
 
hello

got a question. the 87 420 has a non working driver front window. i have traded with known good switches. nothing. replaced the fuse that covers that window. nothing.

is there a relay? and if that functions ok is there a test proceedure to prove the motor is faulty without tearing the other door liner off.

any clues would be appreciated.
tks
craig

BenzMatic 08-04-2003 03:07 AM

I do not think there is a relay for the window motor, you already checked the switch and fuse next come to test the motor. Do you hear a click sound of any kind when you press the window switch?

There are 2 wires screwed to a connection box on the bottom of the door, towards the hinges. Put a volt meter on it and press the switch, if you are getting 12V then you have problem with motor. If you are not getting the voltage, start trouble shooting backward, becuase your motor is OK but some thing is wrong with circuit. Another way of testing the motor is to connect 12V to motor and see if it runs.
HTH

Thomaspin 08-04-2003 11:39 AM

Craig - As you face the fuse/relay box from the front of the car, you will see four relays/relay holders on the right side. The power window relay is the second from the front.

Immediately to its left is the power seat relay and it is identical (check for yourself).

Try inserting the power seat relay in the window relay holder and see if the windows work before spending on a new one.

afmcorp 08-05-2003 12:48 AM

thanks gentlemen for the replys

i did find the relays and switched them and no window movement. when i get to work tomorrow i'll give the switches one more chance.

thanks again.
craig

PS: thomas, the plates for the spring comps are done and they look pretty good. i'll have some free time towards the end of the week so i hope i can get the inner stem rods done.


All times are GMT -4. The time now is 10:06 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website