PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   126 hood sound insulatiom, which side up (http://www.peachparts.com/shopforum/tech-help/7182-126-hood-sound-insulatiom-side-up.html)

Rob Pruijt 04-20-2000 04:55 PM

This weekend I am going to replace the sound insulation of the engine.
A bought a new one, only this one is different from the old. One side had little square holes in it and the other is flat. Which side should be glued to the hood?

jeffsr 04-20-2000 04:59 PM

I think that the eggcrate side goes towards the hood. Smooth should face the engine compartment.

Rob Pruijt 04-20-2000 07:13 PM

I did think so to, only the sound insulation would be better with the "open" side towards the engine. I would like to know it for sure before the glue part.

Rob Pruijt 04-20-2000 08:03 PM

I just got a post frome someone telling me that the "waffel" side should be at the inside (towards engine). Makes sence, larger surface, better absorbation.
Now I just have to wait until it stops raining!

Adamou 04-21-2000 03:05 AM

You must glue the flat face.

------------------
http://connect.to/windowsce
A.S.C. 2000
- Mercedes Benz 560SEC 1986 30.000km BRABUS 412HP
- Mazda 626 2.2L 1990 added compressor + JR competition air filter 230HP

jeffsr 04-21-2000 07:41 AM

Rob, Sorry, I got it backwards, Flat towards sheetmetal. I thought you were referring to the hood pad in your original post?
------------------
Jeff L
1987 300e
1989 300e
1987 BMW 325

[This message has been edited by jeffsr (edited 04-21-2000).]

[This message has been edited by jeffsr (edited 04-21-2000).]


All times are GMT -4. The time now is 03:49 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website