Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 08-11-2003, 10:07 AM
engatwork's Avatar
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 11,232
1992 190E rear brake problems

A couple weeks ago I posted a question concerning problems getting the rear brakes to work on the above listed car. Come to find out that with normal bleeding (mashing brake pedal with bleeder open, releasing, etc) that you have to remove the rear calipers because the bleed port is below where the hose comes in. Seems to prevent you from being able to bleed air out without turning the caliper over. Now that my friend did this he has rear brakes again. Using a power bleed and pushing fluid towards the master cylinder would have prevented this.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 06:40 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page