|
|
|
#1
|
|||
|
|||
Hi again all . This is a smpile thing but I just can't find the coolant release valve for the engine . I found the radiator valve but I can't find the one for the engine . I know the procedure to change it and the ratios , but I need some guidance .
Thanks! |
#2
|
|||
|
|||
Forgot the model . Sorry . It is a 1991 300TE 4matic . Thanks again .
|
#3
|
|||
|
|||
Shouldn't have to drain the engine. The drain in the radiator is the lowest point. Drain from there and flush with clear water. Then refill to spec. I believe that some M103 engines have a drain at the lower right front of the block. Mine do not, but who knows.
------------------ Jeff L 1987 300e 1989 300e 1987 BMW 325 |
#4
|
|||
|
|||
Jeff you are wrong, the water pump hoses are higher than the block. The drain is between the #5 and 6 exhaust manifolds under the car on the side of the block. Alot more will come out. This is the only way to do a complete coolant change.
------------------ Benzmac: Donnie Drummonds 1992 500E (very soon I hope 1981 280GE SWB ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
W126 Valve Stem Seal replacement DONE! | donbryce | Tech Help | 19 | 07-28-2004 08:16 AM |
coolant bleeder valve for 1990 190E 2.6L | mykg4orce | Tech Help | 8 | 07-02-2004 07:38 PM |
Electric fans & radiators | ke6dcj | Mercedes-Benz Performance Paddock | 26 | 09-30-2002 04:30 PM |
Help. Setting Valve Clearances always did confuse me.... | Carrameow | Tech Help | 5 | 09-07-2001 11:22 AM |