|
|
|
#1
|
|||
|
|||
I just changed the electronic idle controler on my 1983 380SEC. I thought it was fixed because it started to idle properly, but it decided to return to its high idle speeds. The resistance between pins 1 and 5 was 10.4 ohms when the control was changed. Could the idle speed control valve be hanging up even after showing the proper resistance? I Hope I didn't screw up the new electronic idle control too!
|
#2
|
|||
|
|||
Many times the valve will fail and take out the controller. You have two problems.
------------------ Benzmac: Donnie Drummonds 1992 500E (very soon I hope 1981 280GE SWB ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Regarding Idle speed in 300TE | endeavor | Mercedes-Benz Performance Paddock | 1 | 03-13-2004 09:40 PM |
The idle speed, should it vary? | rbort | Tech Help | 0 | 03-08-2004 11:31 PM |
Idle Speed - 1985 500 SEC | awfrance | Tech Help | 10 | 01-31-2003 04:30 PM |
High Speed Radiator Cooling Fans Problem? 350 SDL-126 | ezrider | Tech Help | 0 | 05-17-2002 02:59 PM |
'83MB 300SD Idle Speed | Wm. Lewallen | Tech Help | 2 | 04-24-2000 08:52 PM |